ASTM A106/A53/S275/S355 Bututu mara nauyi
Takaitaccen Bayani:
Ana amfani da bututun ASTM A53 (wanda kuma aka sani da bututu ASME SA53) don aikace-aikacen injina da matsa lamba kuma ana iya amfani dashi don bututun gabaɗaya, ruwa, gas da bututun iska.
Bututun Karfe Marasa Ciki Don Manufofin Tsari, Bututun Karfe Mara Sulun Don Tsarin Injini A cikin GB/8162-2008 Standard.Kayan Ya Haɗa Babban Ingantacciyar Carbon Karfe Da Ƙarfe Mai Ƙarfe, Kamar 10,20,35,45 Da Q345,Q460,Q490,42CrMo,35CrMo.
Aikace-aikace: Mechanical da matsa lamba amfani, kuma don isar da tururi, ruwa, gas, da dai sauransu.
Mun dogara da ƙarfin fasaha mai ƙarfi kuma muna ci gaba da ƙirƙira ingantattun fasahohi don biyan buƙatun ASTM A106/A53/S275/S355 Bututun Karfe mara ƙarfi, Kuma muna iya taimakawa neman kusan kowane kaya daga buƙatun abokan ciniki.Tabbatar gabatar da mafi kyawun Kamfani, mafi inganci Babban inganci, Isarwa da sauri.
Mun dogara da ƙarfin fasaha mai ƙarfi kuma muna ƙirƙira nagartattun fasahohi don gamsar da buƙatunSin sumul Karfe bututu da m Karfe tube, Saboda inganci mai kyau da farashi mai kyau, samfuranmu da mafita an fitar da su zuwa ƙasashe da yankuna fiye da 10.Muna fatan yin haɗin gwiwa tare da duk abokan ciniki daga gida da waje.Bugu da ƙari, gamsuwar abokin ciniki shine biyan mu na har abada.
Don amfani da injina da matsa lamba, da kuma jigilar tururi, ruwa, iskar gas da sauransu.
Za a bayar da takaddun gwajin Mill bisa ga EN10204/3.1B.
ASTM A53 bututu (wanda kuma ake kira ASME SA53 pipe) an yi shi ne don aikace-aikacen injina da matsa lamba kuma ana karɓa don amfanin yau da kullun a cikin tururi, ruwa, gas, da layin iska.Ya dace da walda, kuma ya dace da ƙirƙirar ayyukan da suka haɗa da murɗa, lankwasa, da flanging, ƙarƙashin wasu cancantar.
Kayayyaki da Kerawa
Karfe na bututu maras sumul da welded za a yi ta ɗaya ko fiye daga cikin matakai masu zuwa: buɗaɗɗen zuciya, wutar lantarki, ko iskar oxygen.Wutar walda ta bututu mai juriya da wutar lantarki a cikin Grade B za a yi maganin zafi bayan waldawa.
Aikace-aikace: masu musayar zafi, na'urori masu sarrafa zafi, kayan aikin zafi da makamantan bututu.
DN - Diamita mara kyau
NPS - Girman Bututu mara kyau
OD: 6.0mm - 610 mm
WT: 1mm - 120 mm
Tsawon: max 12000mm
| Daraja | C | Mn | P | S | Cr | Mo | Cu | Ni | V |
| Darasi A | ≤0.25 | ≤0.95 | ≤0.05 | ≤0.045 | ≤0.40 | ≤0.15 | ≤0.40 | ≤0.40 | ≤0.08 |
| Darasi B | ≤0.30 | ≤1.20 | ≤0.05 | ≤0.045 | ≤0.40 | ≤0.15 | ≤0.50 | ≤0.40 | ≤0.08 |
| Daraja | Karfin Tensile Rm Mpa | Matsayin Haɓakawa na Mpa | Tsawaitawa | Yanayin Bayarwa |
| A | ≥330 | ≥205 | 20 | Annealed |
| B | ≥415 | ≥240 | 20 | Annealed |
A53 Grade B bututun ƙarfe mara nauyi shine mafi kyawun samfurin mu a ƙarƙashin wannan ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun bututun kuma bututun A53 galibi ana ba da takaddun shaida zuwa A106 B mara ƙarfi bututu.
A53 bututu ya zo a cikin nau'i uku (F, E, S) da maki biyu (A, B).
Nau'in A53 na E yana da walda juriya na lantarki (Maki A da B).
A53 Type S bututu ne mara sumul kuma ana samunsa a maki A da B).
Nau'in A53 F an ƙera shi da tanderun butt ko kuma yana iya samun ci gaba da walda (Grade A kawai).
Bare shiryawa / dam shiryawa / akwati shiryawa / itace kariya a ɓangarorin bututu da kuma dacewa da kariya ga teku cancantar isar ko kamar yadda ake bukata.
Dukansu ƙarshen kowane bututu zasu nuna tsari a'a., zafi no., girma, nauyi da daure ko kamar yadda aka nema.
Mun dogara da ƙarfin fasaha mai ƙarfi kuma muna ci gaba da ƙirƙira ingantattun fasahohi don gamsar da buƙatun Mai Fitar da Kan layi A106/A53/S275/S355 Bututun Karfe mara ƙarfi, Kuma muna iya taimakawa neman kusan kowane kaya daga buƙatun abokan ciniki.Tabbatar gabatar da mafi kyawun Kamfani, mafi inganci Babban inganci, Isarwa da sauri.
Mai Fitarwa ta Kan layiSin sumul Karfe bututu da m Karfe tube, Saboda inganci mai kyau da farashi mai kyau, samfuranmu da mafita an fitar da su zuwa ƙasashe da yankuna fiye da 10.Muna fatan yin haɗin gwiwa tare da duk abokan ciniki daga gida da waje.Bugu da ƙari, gamsuwar abokin ciniki shine biyan mu na har abada.
